TTC 30XSH
Compact safety I/O module for extending the number of I/Os
in automotive applications
About TTC 30XSH
Is a member of the TTC 30X family. Certified by TÜV Nord according to the EN 13849 standard and fulfills Performance Level c (PL c) requirements. Just as the other family members this certified unit must be used in combination with a master module.
For safe communication the standardized CANopen Safety protocol is applicable since compliance to the European standard EN 50325-5 for CANopen Safety is provided. With this TTC 30XSH module, the effort for extending an existing safety critical control system can be reduced to a minimum as it does not have to be modified or recertified. As a result, manufacturers who need to add new functions will strongly benefit from the use of TTC 30XSH.
Product Datasheets
Key Benefits
EN ISO 13849 (PL c) certified
Easy integration and usage
CANopen Safety compliant
30 I/Os with multiple configuration options per pin
Small form factor
Automotive style housing suited for rough operating conditions
Product Overview
| Product | CPU | Number I/Os | Field Bus / Interfaces | Safety Certification / SIL Level | Programming Support |
|---|---|---|---|---|---|
| N4 – Network Controller |
Up to 11970 DMIPS on 4x Arm Cortex- A53 and 3x Arm Cortex-M7 |
2 Outputs 1 Wake-up Input |
1x1000BASE-T1, 6x100BASE-T1, 1x100BASE-TX, 12xCAN (FD), 2xLIN |
ISO 26262 ASIL B |
Yocto GNU/Linux and other POSIX OS possible AUTOSAR Classic envirionment |
| TTC 2310 |
3 cores 32-bit, 300 MHz |
20 inputs (analog, digital, timer, SENT) 36 outputs |
4 x CAN 1 x CAN ISOBUS 1 x CAN (wake-up capable) 1 x LIN |
IEC 61508 SIL 2 EN ISO 13849 PL d ISO 25119 AgPL d SRL2 ISO 26262 ASIL C ISO 19014 MPL d |
C programming (Matlab Simulink I/O Blocklib available) CODESYS® Safety SIL 2 including support for CANopen Safety Master |
| TTC 2380 |
3 cores 32-bit, 300 MHz |
20 inputs (analog, digital, timer, SENT) 40 outputs |
4 x CAN 1 x CAN ISOBUS 1 x CAN (wake-up capable) 2 x Ethernet 1 x LIN |
IEC 61508 SIL 2 EN ISO 13849 PL d ISO 25119 AgPL d SRL2 ISO 26262 ASIL C ISO 19014 MPL d |
C programming (Matlab Simulink I/O Blocklib available) CODESYS® Safety SIL 2 including support for CANopen Safety Master |
| TTC 2385 |
3 cores32-bit, 300 MHz |
20 inputs (analog, digital, timer, SENT) 40 outputs |
4 x CAN 1 x CAN ISOBUS 1 x CAN (wake-up capable) 2 x BroadR-Reach* 1 x LIN |
IEC 61508 SIL 2 EN ISO 13849 PL d ISO 25119 AgPL d SRL2 ISO 26262 ASIL C ISO 19014 MPL d |
C programming (Matlab Simulink I/O Blocklib available) CODESYS® Safety SIL 2 including support for CANopen Safety Master |
| TTC 2390 |
6 cores 32-bit, 300 MHz |
20 inputs (analog, digital, timer, SENT) 40 outputs |
4 x CAN 1 x CAN ISOBUS 1 x CAN (wake-up capable) 2 x BroadR-Reach* 1 x LIN |
IEC 61508 SIL 2 EN ISO 13849 PL d ISO 25119 AgPL d SRL2 ISO 26262 ASIL C ISO 19014 MPL d |
C programming (Matlab Simulink I/O Blocklib available) CODESYS® Safety SIL 2 including support for CANopen Safety Master |
| TTC 590 |
32-bit, 180 MHz |
36 inputs (analog, digital, timer) 60 outputs (36 x PWM with current feedback) |
6 x CAN 1 x CAN ISOBUS 1 x BroadR-Reach® 1 x LIN 1 x RS-232 |
EN 61508 SIL 2 EN ISO 13849 PL d ISO 25119 AgPL d* ISO 26262 ASIL C* |
CODESYS® Safety SIL 2 C programming (Matlab Simulink I/O Blocklib available) SAFERTOS® integration |
| TTC 580 |
32-bit, 180 MHz |
36 inputs (analog, digital, timer) 60 outputs (36 x PWM with current feedback) |
7 x CAN 1 x Ethernet 1 x LIN 1 x RS-232 |
EN 61508 SIL 2 EN ISO 13849 PL d ISO 25119 AgPL d* ISO 26262 ASIL C* |
CODESYS® Safety SIL 2 C programming (Matlab Simulink I/O Blocklib available) SAFERTOS® integration |
| TTC 540 |
32-bit 180 MHz |
52 inputs (analog, digital, timer) 44 outputs (28 x PWM with current feedback) |
4 x CAN |
EN 61508 SIL 2 EN ISO 13849 PL d ISO 25119 AgPL d* ISO 26262 ASIL C* |
CODESYS® Safety SIL 2 C programming (Matlab Simulink I/O Blocklib available) SAFERTOS® integration |
| TTC 510 |
32-bit, 180 MHz |
44 inputs (analog, digital, timer) 40 outputs (16 x PWM with current feedback) |
3 x CAN 1 x LIN |
EN 61508 SIL 2 EN ISO 13849 PL d ISO 25119 AgPL d* ISO 26262 ASIL C* |
CODESYS® Safety SIL 2 C programming (Matlab Simulink I/O Blocklib available) SAFERTOS® integration |
| TTC 508 |
32-bit, 180 MHz |
44 inputs (analog, digital, timer) 32 outputs (10 x PWM with current measurement) |
2 x CAN 1 x CAN ISOBUS 1 x BroadR-Reach® |
EN 61508 SIL 2 EN ISO 13849 PL d ISO 25119 AgPL d* ISO 26262 ASIL C* |
C-programming (Matlab Simulink I/O Blocklib available) |
| TTC 94 |
16/32 bit 80 MHz |
28 inputs (analog & digital) 20 outputs (8 x PWM, 4 PWM with current feedback) |
4 x CAN 1 x LIN 1 x RS 232 |
EN ISO 13849 PL d* |
CODESYS® C-programming (Matlab Simulink I/O Blocklib available) |
| TTC 32S |
16-bit, 80 MHz |
14 inputs (analog & timer) 16 outputs (digital, voltage, PVG and 8x PWM, 6 with current feedback) |
2 x CAN | EN ISO 13849 PL d* | C-programming (Matlab Simulink I/O Blocklib available) |
| TTC 30SH |
16-bit 80 MHz |
14 inputs (analog & timer), 16 outputs (digital, voltage, PVG and 8x PWM, 6 with current feedback) |
1 x CAN | EN ISO 13849 PL c | C-programming (Matlab Simulink I/O Blocklib available) |
| TTConnect 616CS |
3 cores 32 bit 300 MHz |
Not applicable |
6 x 100BASE-T1 BroadR-Reach® 1 x 100BASE-TX Ethernet |
Not applicable |
Not applicable „plug & play“ solution via TTC Downloader |
|
*available for C-programming only |
| Product | CPU | Number I/Os | Field Bus / Interfaces | Safety Certifcation / SIL Level | Programming Support |
|---|---|---|---|---|---|
| TTC 48XS |
16/32 bit, 80 MHz |
28 inputs (analog & digital), 20 outputs (8x PWM) |
1 x CAN | EN ISO 13849 PL d |
Slave software preinstalled – attached to a master controller via CANopen as slave unit |
| TTC 30XSH |
16/32 bit, 80 MHz |
14 inputs (analog & timer), 16 outputs (digital, voltage, PVG and 8 x PWM, 6 with current feedback) |
1 x CAN | EN ISO 13849 PL c |
Slave software preinstalled – attached to a master controller via CANopen Safety as slave unit |
This product is supplied by TTControl and distributed for the automotive market by TTTech Auto. For software updates and other technical information, visit the service area. If you need access, please get in touch with your TTTech Auto sales contact.
Service Area
For further information, including price and availability, please contact products@tttech-auto.com.
Visit the ECU & Displays Service Area